User Manual WUSB receiver
	Specifications
1	Battery Type: built-in rechargeable battery
2	Battery voltage: 3.7V
3	Peak operating current: 220mA
4	Wireless transmitter: FM / FSK
5	Radio transmitter operating frequency: 433.92MHz
6	Build-in Memory: 256MB
	How to use
1	Charge battery fully with supplied USB cable from laptop or PC. You can also charge the Battery with a Nokia Mobile phone charger smallest jack type. Battery is fully charged in approx 3 hours, and should last 72 hours, for normal mixed use.
2	Turn the switch toggle to ON position, the unit will start with LCD screen welcome and you are ready to fish and use receiver. The receiver will go to standby mode after 2 min without use, to safe battery. In order to reactivate, hold down >II key for 2 sec.
3	Time setting
	In standby mode, hold down >II button for 2 sec to start.
	Press >> for 2 sec and the ”hour” flashes”, press key >> to set; press T key to choose minute, minute flashes, press key >> to set; press T key to choose second, second flashes, press key >> to set. After setting, press >II key to save and exit. The clock will work even when the unit is powered off.
4	Adjust the Volume
	Press V key to adjust the volume at the desired level, there are 10 levels, including silent mode. The chosen level will be default when receiver is turned on next time.
5	Recording Function
	In active mode, press and hold the recording key “o”, till LCD displays “Please wait”. Then Release the key and LCD displays “recording” screen - Point the microphone which is located just under the “T” key, to the sound source, then press “o” key to start, press ”o” key to stop, the unit will automatically save the record with a “REC” nbr. that is displayed. Repeat above for multiple record’s . To exit recording status, press and hold the recording key till LCD displays ‘Please wait’, release the key and the unit will be back in active standard mode. All the saved files will be saved with a name such as REC003 .mp3 and can be transferred to PC or laptop, via USB cable.
6	MP3 player
	In active mode, press PLAY key to play. Press >> key to choose the music and press play key. Press >II key to pause music at any time. To play recorded message press T key, press >> key to choose next recorded message. You may first press >> key to choose the right file, then press “>II” key to play MP3 or T key to choose playing recorded message.
7	How to Delete MP3 file or recorded message
	In active mode, press >> key to choose file, then press and hold T key for 2sec. ‘DELETE’ flashes in red letters, reminding you that you are about to delete the selected file. Press T key again and you will delete the file, press >II key to exit. The unit will auto exit back to active mode in case no operation is detected in 6sec
8	Set the Receiver alert mode
	In standby mode, slid the switch located on the left side of the unit to choose between:
	1.      Light + Sound
	2.      Light + Sound + Vibration
	3.      Light + Vibration
9	Pair to a chosen alarm
	In active mode, press the S key, which is located on top side of the receiver, for 2sec to choose a color LED which is actually an indicator for a chosen alarm, to pair the receiver with. The first LED is red; press S key again and again to choose LED in the sequence of red -> green -> blue -> yellow. After you chose the alarm color LED on the LCD display, activate the detection wheel on the alarm to transmit a signal, the corresponding LED color on the LCD display on the receiver will stop flashing and become stable, when it gets the signal. This indicates the paring job is done! There are 4 kinds of standard beep sounds preset you may choose from your MP3 files or any recorded messages. Please refer to below instruction ‘Select individual tones”. Follow the same steps to pair next alarms. In case the selected LED shows as stable light and not flashing when paring the receiver to an alarm, you need to re-pair the units, as the channel you choose is already paired to some alarm. In this case, you need to erase the old paring code and re-pair the receiver. Please refer to “Erasing the paired code”
10	Erasing the paired code
	In active mode, to erase the paired code on the receiver, press the ‘S’ key for 2sec to light up the red LED, then press S key to choose the LED color pair, you want to erase. Then press the S key till the light changes from stable to flashing. Pairing is now deleted.
11	Select individual tones
	Only a paired alarm can have an individual tone on the receiver. In active mode, press the ‘S’ key for 2sec to light up the red LED, in case the LED is stable, the unit will start to make standard “Bib-tone”, to change to a desired tone, press the T key for 2sec, the unit will play the MP3 file or your recorded message, you may press >> key to choose next MP3 file or press T key to switch to play recorded message. Press S key to confirm the choosen MP3 or recorded message as your individual alarm tone and the unit will exit to standby mode. The unit will auto repeat playing the file in case no operation is detected. To select individual tone for next alarm, press the S key for 2sec, “red” alarm will display first, press S key again to choose next alarm, and procedure above again.
12	In Use
	The alarm will beep when turned on, the receiver will respond with tone and the LCD screen will switch to active mode. The corresponding LED color will light up. If the alarm keeps alerting, the receiver will keep on beeping as well 1:1 and the alarm color icon with text will flash. In case the receiver is set with a individual MP3 or recorded message - the receiver will start this sound with1-2 seconds delay due to the MP3 players initialization. After any given signal from the alarm to the reciever LED color icon for this alarm will stable light up for 20sec then the unit will exit to standby mode.
13	LCD screen
	The unit will auto hibernate to standby mode in case no operation is detected in 2 minutes, the LCD will be shut down but receiver unit is still on working fully. The LCD will be light up in case any signal is detected from a paired alarm You may manually quit hibernate mode and back to standby mode by press >II key for 2sec.
14	Low battery alert
	The unit will auto detect the battery voltage in standby mode and indicate the level by the battery icon on the LCD screen. In case the battery is running low - the battery icon will flash followed by beeping tone. If the battery is not recharged the unit will beep at intervals of 1 minute till battery is replaced; the unit will auto shut down in case you recharge.
15	Charging of the receiver
	Charge battery fully with supplied USB cable from laptop or PC. You can also charge the Battery with a Nokia Mobile phone charger smallest jack type in to the DC Port. Battery is fully charged in approx 3 hours, and should last 72 hours, for normal mixed use.
16	Power OFF
	Slide the switch to OFF.
User Manual WUSB Alarm
	Specifications
1	Battery Type: 6A76
2	Battery voltage: 6V
3	Standby Current: 0.006mA
4	Peak operating current: 110mA
5	Wireless transmitter : FM / FSK
6	Radio transmitter operating frequency: 433.92MHz
	How to use
1	Turn on the unit
	Press and hold the black key on the front for 3sec to activate, the LED will flash 6 times. The alarm is on!
2	Adjust the volume
	Press the black key on the panel to adjust the volume, there are 5 sound levels to choose, including silent mode!
3	Low battery alert
	The unit will auto detect if the battery voltage in standby mode, is lower than 4V. The alarm will "beep" in 1 minute intervals till battery is replaced.
4	In use
	Rotate the detection wheel and the alarm transmits signal to receiver and light and tone is activated. The delay on the up light LED’s under the detection wheel is set to 20sec.
5	Turn Power OFF
	Press the black key for 2sec, the LED indicator will flash for 3 times then the alarm powers OFF.
	Important Notice
1	Only use Battery Type: 6A76 – when replacing battery, gently and carefully unscrew the 4 screws from the back plate of the alarm. Do NOT damage or force the screws, to unscrew. Make sure to replace battery – same position as the removed one. Be careful not get liquid inside alarm. Replace back plate carefully, and make sure rubber seal is in right position, before screwing screws firmly back in place.
2	To save energy, Alarms should always be powered off during transport and no usage. The battery should be removed from the alarm in case in case you will not use it for longer period.